Disassembly Instructions
CPOD
Document: CAM-303
Revision: 01
Date: June 7, 2012
Tools: #2 #3 Phillips Head, Rubber Mallet or Hammer, Allen Key
Skill Set: Good manual dexterity.
Estimated Time: 15min per chair.
Steps:
1. Armrest - 2min
Turn the chair upside down, so the bottom is visible. Locate the four fasteners locate on the
underside of the seat pan and unfasten. If the chair is with width adjustable option, loose the
arm knob located underside of the seat panel and remove the arm. Remove the width
adjustable bracket by unfastening screws located underside of the seat pan. Flip the chair to
the opposing side and repeat the process.
2. Arm Cap - 1min
Turn the arm upside down so the bottom is visible. Locate the two fasteners and unfasten.
Remove the arm cap from the arm.
3. Back Bar - 1min
Locate the three fasteners located on the underside of mechanism and unfasten. Remove the
backrest and back bar from the chair.
4. Back Rest - 2min
Separate the back rest from the back frame by unfastening 3 screws located on the back
frame. Fasteners are covered by the plastic caps; remove the plastic caps with the help of
flathead screw driver. Locate the fasteners and unfasten.
5. Casters - 2min
Lay chair on back. Grasp and pull to remove casters from the base.
6. Base - 1min
Hold the base legs firmly and strike the bottom of cylinder with a hammer until base comes
loose, remove base.
