ALLSAT COME2ASCOS, Быстрая справка

Страница: 8 / 26

Q
UICK
R
EFERENCE COME
2
ASCOS AND COME
2
ASCOS BLUE
7
C
ONFIGURATION
S
OFTWARE
Before you can start with the configuration the following requirements have
to be fulfilled:
- A valid SIM card is inserted into the modem according to the preceding
chapter.
- A GSM antenna is connected to the device.
- The come 2 ascos device is supplied by stabilized power between 8 and
13.5 Voltage.
- The come 2 ascos device is connected to a serial interface of your
Personal Computer by the configuration cable.
Then proceed with the following steps:
- Switch on the power supply. The come 2 ascos device will register at the
GSM net and indicate this state by a quickly flashing yellow LED.
Please wait until the flashing fades to a slower frequency after about
30 seconds.
- Push the function button for about two seconds until the green and
yellow LED flash quickly. The device is in pause mode now.
- Start the .exe file of the configuration software. A dialog shown in
figure 2 opens. Choose the serial port of your Personal Computer
which the come
2 ascos device is connected to. Click “Connect”.
figure 2