QMS - CTL
Shock Mitigating Pedestal
Operation & Service Manual
This document and its contents are proprietary and confidential to Allsalt Maritime or its subsidiaries and
affiliates. Neither this document, nor any part of it may be disclosed or conveyed to, used or copied by or for any
third party without the prior written consent of Allsalt Maritime all rights reserved.
R-05 / Jan 2021 / 1 of 2
For Your Safety
SHOXS
Shock Mitigating Pedestals are designed to be capable of use in extreme conditions.
SHOXS
can
increase both vessel operating envelopes and crew and passenger endurance by increasing safe and
comfort and aiding in the prevention of personal injury. These features can assist in completing operations
that take place in challenging environments.
WARNING
TO REDUCE THE RISK OF SEVERE INJURY OR DEATH TO
PERSONS:
READ AND FOLLOW ALL INSTALLATION INSTRUCTIONS.
Failure to follow the installation
instructions may cause serious injury or death to persons and damage to the vessel and product.
OPERATE YOUR VESSEL RESPONSIBLY.
There are upper limits to the operation of any vessel or
vehicle –
SHOXS
products are not a replacement for their responsible operation and will not prevent
personal injury. High-G impacts can and will still exceed the product’s ability to absorb them.
DO NOT USE THIS PRODUCT IF
it is damaged or suspected to be malfunctioning.
REPAIRS OR ALTERATIONS
made without prior approval of the manufacturer will void your warranty
and may cause serious injury or death to persons and damage to the vessel and product.
Do not use this product outside of the scope of its intended purpose. Follow the
SETUP PROCEDURE
to
ensure your shock mitigating pedestal is performing at its best capability for conditions.
LIMITED WARRANTY AND LIABILITY
SEE THE LAST PAGE FOR A DETAILED LIMITED WARRANTY STATEMENT.
The information contained in this Operation & Service Manual is subject to revision at any time without notice.
CAUTION
