1.
Fill the engine with fuel and oil as per the engine manufacturer's instructions.
2.
Ensure catcher is fitted correctly (
refer to OPERATING PROCEDURE
).
3.
Check the height adjustment is set correctly for the mowing conditions you are about to encounter
(
refer to OPERATING PROCEDURE
).
4.
Start the engine in accordance with the engine manufacturer's instructions.
5.
Allow the engine to warm up for several minutes.
6.
Run the engine at maximum throttle setting.
7.
NB. Some models may have a fixed throttle. Please refer to the engine owners
manual for the configuration of your machine.
1.
Adjust the throttle control to the slow position.
2.
Switch the engine off.
Allow all moving parts to come to a complete stop before transporting or storing the unit.
The Supaswift Lawn Mower has 12 height positions. Positions are indicated
by the holes in the Quadrant plate (1) which mesh with the pin on the height
adjuster leaver (2). Position 1 is a travel position and must not be used for
mowing. In this position the mower blades are too low to cut grass and
damage may result. Please refer to the table below for more information.
Tip: Remember grass is a living plant and requires its leaves to live.
The leaves are what you cut and by cutting too low can result in killing
of your grass and a poor finish. This can also cause premature wear
and damage to your lawn mower.
HEIGHT ADJUSTMENT TABLE
RESULT DESIRED
HEIGHT ADJUSTER
POSITION
RESULT DESIRED
HEIGHT ADJUSTER
POSITION
1.5cm
2
4cm
8
2cm
3
4.5cm
9
2.5cm
4
5cm
10
3.5cm
7
5.5cm
11
3cm
6
6cm
12
P a g e
| 6
WARNING:
AVOID INJURY. Read
and understand the entire
Safety
section before proceeding.
CAUTION:
Read the Engine Manufacturers
Operators Manual for detailed starting
instructions
HEIGHT ADJUSTER POSITION
ENGINE STARTING PROCEDURE
SHUTTING DOWN THE MACHINE
Image 4
