ALL POWER™ EPW1600 POWER WASHER | 11
Step 3
(Fig 10)
Offloading the Front-gun, and install the
detergent nozzle with the bottle.
(Fig 10)
Step 4
To apply the detergent cleanser to your working
area, turn the pressure washer switch to the ON
position. Pull the trigger to operate the unit.
The pressure washer will mix the detergent with
water. Do not allow the detergent to dry on the
object that you are cleaning.
WARNING
NEVER USE PRODUCTS WITH BLEACH OR
CHLORINE OR ANY OTHER CORROSIVE
MATERIALS, INCLUDING LIQUIDS CONTAINING
SOLVENTS (I.E. GAS, OILS ETC), TRI-SODIUM
PHOSPHATE PRODUCTS, AMMONIA, OR ACID-
BASED CLEANERS. THESE CHEMICALS WILL
HARM THE UNIT AND CAUSE DAMAGE TO THE
SURFACE BEING CLEANED. ALWAYS READ THE
LABEL.
Clean-Up And Storage
Shutting Down the Pressure Washer
WHEN FINISHED USING THE PRESSURE
WASHER, FOLLOW THESE STEPS TO SHUT
DOWN THE UNIT:
(Fig 11)
• Turn the pressure washer to the OFF
position.
• Turn off the water supply.
• Before disconnecting high-pressure
hose connection, point the gun in a safe
direction and discharge the high-pressure
water.
• Disconnect high-pressure hose from the
pressure washer and gun.
• Disconnect garden hose from the
pressure
washer.
• Remove excess water from the pump by
tipping the unit on both sides to
drain any remaining water from inlet and
outlet fittings.
• Remove Water Intake Filter and flush with
water to remove dirt or debris. Return
filter once cleaned.
(Fig 11)
• Drain detergent reservoir and flush with
running
water.
• Wipe away any remaining water on all
parts and fittings.
• Engage the gun safety lock.
• Store the pressure washer, parts, and
accessories in an area with a temperature
above 0°C (32°F).
OWNER’S MANUAL
| DETERGENTS/CLEAN-UP AND STORAGE
11
