TROUBLESHOOTING
Slow Flow Rate
Slow Flow Rate
1.
Clean the pump’s housing. Occasionally, large clumps of debris may block it
and thus restricting the flow.
2.
Locate the impeller and inspect for damage and clear the fittings and parts
of any waste build-up.
3.
Ensure that the plastic propeller part of the impeller is attached to the
ceramic part and that they have not come apart or split. If this is the case you
need to replace your impeller.
Unable to start the pump
1.
Check power supply is on.
2.
Check fuse and cable for any damage.
3.
Follow the slow flow rate guide (see above).
If none of the above resolves your issue, or you require spare parts for your
pump, please contact the supplier of your unit.
SPECIFICATIONS
WF-20000
90W
275 x 252 x 420
1m
FOUNTAIN HEIGHT:
DIMENSIONS (LxWxH) (mm):
POWER (WATTAGE):
3m
FOUNTAIN DIAMETER:
CABLE LENGTH:
20000L/H
OUTPUT:
MODEL:
10m (Plug not included)
VOLTAGE:
220-240v / 50Hz
