BWS-136 User Manual_amend.doc
- 27 -
Flow Control: None
Interface:
RS-232
Now you can use serial terminal software to send the ASCII
command to BWS-136.
In Serial Console Mode, all the network functions will be
disabled
Once the configuration is completed, remember to switch SW1
back to Normal operation mode and reboot the module by Reset
Command or push reset button.
Telnet Console Mode
BWS-136 uses Port number
5001
as telnet console port.
Remember to turn on the LOCALECHO before opening the telnet
console port. You must login first before sending command to
BWS-136. If password is enabled, you need to use the password
to log in. The password is encrypted using Tiny Encryption
Algorithm (TEA) and the keys are sixteen bytes with low case
character from “a” to “p”. The login command format is as
follow:
$LOG[16 bytes of TEA Encrypted Password]
or
$LOG
if there are no password settings
BWS-136 User Manual_amend.doc
- 28 -
Forgot Password
If you forgot the Password, you can switch SW1 to Factory Default
setting mode and use default IP Address
192.168.16.10
and enter the
Web console pages. Once the configuration is completed,
remember to switch SW1 back to Normal operation mode and
reboot the module by Reset Command or push reset button.
Password is not required for serial console mode. Therefore you
can also use serial console to reset the password.
Command Syntax
The command syntax is
[Delimiter][Command][Carriage Return/
CR
][Line Feed/
LF
]
Delimiter (one byte)
: The command begins with a delimiter of
dollar sign $ and if BWS-136 receives the correct command it will
response with an echo which begins with the delimiter of a
percentage sign %.
Command
: The command are ASCII string which contains three
elements: {
R
ead/
W
rite}{Function}{Parameter} as described as
follow:
