Alloy AS5010-P, Руководство пользователя

Страница: 65 / 435

AS Series User Manual
64
Doc No.: AS5-0116-01
Communities
This
function is used to configure SNMPv3 communities.
Information
To configure the SNMP Community parameters via the Web Interface:
1. Select Configuration > Security > Switch > SNMP > Communities.
2. If using the default public and private community names enter the required Source IP
Address and Subnet Mask.
3. Alternatively click Add New Entry to add a new community name, along with required
Source IP Address and Subnet Mask.
4. Click Apply to confirm your settings change.
Fig. SNMPv3 Community Configuration
Parameter Description
Delete Tick the check box next to the entry you want to delete and click the Apply
button.
Community Indicates the community access string to permit access to SNMPv3 agent. The
allowed string length is 1 to 32, and the allowed content is ASCII characters from
33 to 126. The community string will be treated as the security name and map
to a SNMPv1 or SNMPv2c community string.
Source IP The SNMP access Source Address. This can be used in conjunction with the
Source Mask to limit where SNMP information is sent and received from. It can
be limited to a single IP Address or an entire subnet.
Source Mask Indicates the SNMP access source address mask.
Add New Entry
Click to add a new SNMPv3 Community string.
Buttons Apply – Click to save changes.