Alloy 10/100 Base-TX to 100Base-FX Converter  POE Power Provider POE100 Series Скачать руководство пользователя страница 9

Note: 

1.  S1-2 and S1-3 will take effect only when S1-1 is set to TP-Force 
2.  S1-5 must be set to 100FDX for Single Fibre Model 
3.  S1-6 must be set to POE when you need to supply power to a PD. 

 
Warning: 

-  When the copper port is set to AUTO and is connected to a device that 

is forced to 100Mbps FDX, an unknown state may result. 

-  Please ensure that all network nodes that this device connects to are 

set to the same mode at each end of the link.  
e.g., Both ends are set to Auto-Negotiation mode (AUTO) 

 

9.  Cable Distances and Limitations 

 

TP Cable Limitations:

 Cat 5 up to 100m

   

Fibre Cable Limitations: 

 

SC/ST Converter Models 

Multi Mode Half Duplex 

412m

Multi Mode Full Duplex 

2Km

Single Mode Half Duplex 

412m

Single Mode Half Duplex 5/20/40/60/80/100Km

 
 
 
10. Technical  Specifications 

 
Standards: 

IEEE 802.3u 10/100Base-TX, 100Base-FX 
IEEE 802.3af Power Over Ethernet 

UTP Cable: 

Cat. 5 cable up to 100m 

Fibre Cable: 

50/125, 62.5/125 or 100/140 µm multi mode 
8.3/125, 8.7/125, 9/125 or 10/125 µm single mode 

Power Feeding 
Support: 

Via TP Pins 1, 2, 3 and 6 

LED Indicators: 

Power, POE, TP LNK/ACT, 100, FX LNK/ACT, 
FDX/COL, 4W, 7W, 15.4W 

Data Transfer Rate: 

100Mbbps – 148,800pps 
10Mbps – 14,880pps 

Flow Control: 

IEEE 802.3x compliant for Full Duplex  
Backpressure flow control for Half Duplex 

Power Requirements: 

AC 100 ~ 240V 50 ~ 60Hz 

Power Consumption: 

24W 

Ambient Temperature: 

0º to 50º C 

Humidity: 

5% to 90% 

Dimensions: 

40(H) x 158(W) x 133(D) mm 

Complies with C-Tick, FCC Part 15 Class A and CE Mark 

 

Содержание 10/100 Base-TX to 100Base-FX Converter POE Power Provider POE100 Series










Отзывы: