page 1 of 2
v1
PolyForm
™
Modular LED Light Bars
Installation Instructions
1. Snap the front connector of
the PolyForm fixture to the
wire socket of the plug from
the top down.
2. Follow this same method
to seamlessly link fixtures
and connectors to create the
desired design.
3. Snap the end cap onto the end
of the last fixture.
Plug the DC power cable into
the power supply to illuminate
the fixture.
Assembling PolyForm Fixtures
Note: PolyForm is 12V DC - Do Not Connect To 120V AC Power
See Next Page For Mounting Instructions
®
®
Specifications subject to change without notice.
www.AlloyLED.com | Call: 800.910.LEDS [5337] | Text: 510.400.6690 | [email protected]
