Connectors and LEDs
2-5
SG-9500 Hardware Guide
CAUTION
The bypass cable USB connections should only be
connected/disconnected when the system is powered down.
SG-9500 Configuration B (8 x 1/10G and 4 x 100G Ports)
Figure 2-6 – SG-9500 Configuration B Rear Panel
Rear Panel Connectors
•
100/10G/1G NETWORK/STEERING LINKS
In this configuration two
different kinds of NIC cards are used, as follows:
P1
: 4 x 1G/10G Network or Steering Interfaces
P2
: 2 x 100G Network Interfaces
P3
: NOT IN USE
P4
: 4 x 1G/10G Network or Steering Interfaces
P5
: 2 x 100G Network Interfaces
P6
: NOT IN USE
NOTE It is possible for the 100G interfaces of Configuration B to be installed with
PSM-4 Transceivers (MTP-MTP, SM Only). This requires an HD 4 Bypass unit
with PSM-4 Transceivers as well. For more information, contact Allot
Customer Support.
The 1G/10G interfaces can support 1G/10G SFP+ fiber or 1G RJ45 Copper
interfaces and may be used for Steering, Network Traffic or Asymmetry
traffic.
The 4 x 100G interfaces can support 100G QSFP28 fiber and may be used
for
Network traffic only
(not available for steering or Asymmetry).
MONITOR PORT
M3
BYPASS
POWER SUPPLIES
M1
P1
P2
P3 NOT IN USE
P4
P5
P6 NOT IN USE
iLO
PORT
M4
M2