Connectors and LEDs
2-2
SG-9500 Hardware Guide
Front Panel Buttons and LEDS Description
Figure 2-3 – SG-9500 Front Panel LEDs
ITEM
DESCRIPTION
STATUS
1
Power On/Standby
button and system
power LED
Solid green = System on
Flashing green (1 Hz/cycle per sec) = Performing power
on sequence
Solid amber = System in standby
Off = No power present**
2
Health LED
Solid green = Normal
Flashing green (1 Hz/cycle per sec) = iLO is rebooting
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System critical†
3
NIC status LED
Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
4
UID button/LED
Solid blue = Activated
Flashing blue:
•
1 Hz/cycle per sec = Remote management or
firmware upgrade in progress
•
4 Hz/cycle per sec = iLo manual reboot sequence initiated
•
8 Hz/cycle per sec = iLo manual reboot sequence in progress
Off = Deactivated
Front Panel Connectors
All connectors are located on the rear panel of the SG-9500.