MEMORISING A NEW TRANSMITTER USING THE PROCEDURE “IN THE VICINITY OF
THE RECEIVER”
[requires a transmitter already memorised]
The procedure must be performed within the reception range of the receiver (maximum 10-
20 m from receiver).
• If the OLD transmitter is memorised in “Mode I” during the procedure press any key
either on the Old or New transmitter;
on the other hand, if the OLD transmitter is memorised in “Mode II”, during the procedure
press the required command key on the OLD transmitter and the associated key to be
memorised for this command on the New transmitter.
• There are two procedures: choose one as preferred
Standard procedure:
1.
On the NEW transmitter, press and hold the key *** for at least 5 seconds and then
release.
2.
On the OLD transmitter, press the key *** 3 times and then release.
3.
On the NEW transmitter, press the same key pressed in point 01 once and then release
Visit our website: www.Alloremotecontrol.com
