ALLO PRI Gateway
User Manual V2.0
12
3. Setting Up Features
3.1 System Dash Board
3.3 SIP Trunks
3.3.1 Add a SIP Trunk
Navigation:
SETUP > SIP Trunk > Add a SIP Trunk
: This is where you setup your SIP Trunks
1) Click Add SIP Trunk
2) Create a SIP user account for below registration methods.
3) Registration
Mode:
•
None: IP peer trunking
•
From Gateway: Gateway is registering to PBX or VoIP service provider
•
To Gateway: Endpoint registering to G/W
4) Enter the PBX or VoIP service provider IP address for registration mode “ From
Gateway or None”
5) Click authentication, if it is required
6) Click registration and add registrar address
7) Create and Save All.