4
other designs can provide and results in the great
benefit of an extremely wide range of output
frequencies.
•
"Soft-start" Circuitry. Allnic uses soft start circuitry that,
after sufficient warm-up only, provides the high voltage
supply to the plate of each tube. This protective design
results in prolonged tube life and fewer and less
frequent issues with tube performance.
•
Analogue Power Tube Current Monitors. In order to
provide constant current (bias) monitoring for the power
tubes, Allnic uses a separate analogue current meter for
each tube. The meters make it exceptionally easy to see
the status of each tube at any time and to respond
immediately to any variation in bias by use of the bias
control knob for the relevant tube. The meters offer a
simple, unambiguous indication of each tube's status
compared to conventional LED bias monitors.
•
"On-the-Fly" Triode/Pentode Switching. Switching
between triode and pentode operation can be done "on-
the-fly" at any time while the amplifier is in use.
•
Beautiful 10KHz square wave response. See Figures 1-3.
•
As are all Allnic Audio products, the T-2000 25
TH
ANNIVERSARY is fully RoHS (EU Reduction of Hazardous
Substances regulation) compliant in construction and
materials.
WHAT’S IN THE BOX?
Please check that the shipping box contains the following:
•
One (1) Allnic T-2000 25
TH
ANNIVERSARY stereo
integrated amplifier
•
One (1) Allnic remote control
•
One (1) Allen wrench for screws on top of the tube
chimneys
•
One (1) IEC type power cord
•
One (1) Owner’s Manual
Note:
1)
The T-2000 25
TH
ANNIVERSARY ships with the tubes
installed.
2)
The T-2000 25
TH
ANNIVERSARY will work with most
IEC type aftermarket power cords. Of course, only
you can determine the power cord that works most
synergistically with the T-2000 25
TH
ANNIVERSARY in
your system.
3)
Be sure the T-2000 25
TH
ANNIVERSARY is labeled for
the AC voltage of your location. If it is not, please
contact Audiomentors.
We advise that you keep the boxes and other packing
materials that your T-2000 25
TH
ANNIVERSARY came in. It will
be useful if you sell your T-2000 25
TH
ANNIVERSARY or in the
unlikely event you need to ship it for service.
SAFETY
•
Remove ALL protective cushioning material
(cardboard around and “O” rings on tubes) inside
the tube chimneys before operation. The tube
chimneys should contain NOTHING except the
tubes.
•
Disconnect the power cord by pulling the plug, not
the cable.
•
Do not attempt any repairs. Do not remove the unit’s
chassis cover without specific authorization from
Audiomentors.
•
Keep the power cord away from heat sources
•
Keep the unit away from liquids – do not allow any
liquid to enter the interior of the unit.
•
When the unit is moved from a cold to a warm
environment, allow sufficient time for any
condensation to evaporate before plugging the T2000
25
TH
ANNIVERSARY into an AC connection.
•
Do not attempt any repairs.
•
See the notes on “Location, Location, Location”.
CLEANING
A.
Chassis and glass/plastic
Use only a soft, lint-free cloth, dampened slightly with water
only (NO cleaning fluids!), to clean the faceplate, chassis and
tube chimneys of the T-2000 25
TH
ANNIVERSARY .
B.
Connectors
You may use any good quality contact cleaner recommended
for such applications to clean the contacts from time to time,
as you deem appropriate.
