4
WHAT’S IN THE BOX?
Please check that the shipping box contains the following:
•
One (1) Allnic T-1800 EL34 stereo integrated amplifier
•
One (1) Allnic remote control
•
One (1) Allen wrench for screws on top of the tube chimneys
•
One (1) IEC type power cord
•
One (1) Owner’s Manual
Note:
1)
The T-1800 ships with the tubes installed.
2)
The T-1800 will work with most IEC type aftermarket power cords. Of course, only you can determine
the power cord that works most synergistically with the T-1800 in your system.
3)
Be sure the T-1800 is labeled for the AC voltage of your location. If it is not, please contact
Hammertone Audio.
We advise that you keep the boxes and other packing materials that your T-1800 came in. It will be useful if
you sell your T-1800 or in the unlikely event you need to ship it for service.
SAFETY
•
Remove ALL protective cushioning material (cardboard around the tubes) inside the tube chimneys
before operation. The tube chimneys should contain NOTHING except the tubes
(It is optional to
leave the “O” rings on the small tubes; some prefer the sound with the O rings on).
•
Disconnect the power cord by pulling the plug, not the cable.
•
Do not attempt any repairs. Do not remove the unit’s chassis cover without specific authorization from
Hammertone Audio.
•
Keep the power cord away from heat sources
•
Keep the unit away from liquids – do not allow any liquid to enter the interior of the unit.
•
When the unit is moved from a cold to a warm environment, allow sufficient time for any condensation to
evaporate before plugging the T-1800 into an AC connection.
•
Do not attempt any repairs.
•
See the notes on “Location, Location, Location”.
CLEANING
A. Chassis and glass/plastic
Use only a soft, lint-free cloth, dampened slightly with water only (NO cleaning fluids!), to clean the faceplate,
chassis and tube chimneys of the T-1800.
B.
Connectors
You may use any good quality contact cleaner recommended for such applications to clean the contacts from
time to time, as you deem appropriate.
