9
THE CURRENT METERS
The illuminated meters indicate the current supply to each of the two 300B power tubes in the T-1500
MK2. When you turn on the T- 1500 MK2, the needle of the current meter for each 300B should be
between the two parallel lines on the meter face. Any failure of a 300B tube is indicated by the needle
on the meter moving out from between these two parallel lines.
If a meter’s needle moves to or below the left parallel line on the meter face during operation, this
indicates a failure of the related 300B tube. You must turn off the T-1500 MK2 and replace the tube. If
you have any questions about doing this, please contact your Allnic dealer for assistance.
All consequences of changing or attempting to change tubes are borne by the user unless by express
agreement between the owner and owner’s Allnic dealer. Allnic Audio and its dealers are not liable in
any way whatsoever for any injury or loss incurred by the user or for damage to the T- 1500 MK2, any of
its parts, or tubes or replacement tubes resulting from the user changing or attempting to change
tubes.
SPECIFICATIONS FOR THE ALLNIC AUDIO T-1500 MK2 300B SET STEREO INTEGRATED AMPLIFIER
•
Output Power:
10w + 10w (4, 8 or 16Ω load, at 1KHz)
•
Distortion:
0.3% at 1KHz, 2.83V
•
Frequency
Response:
20Hz - 20KHz Flat
•
S/N Ratio:
-80dB (CCIR, 1KHz)
•
Damping
Factor:
10 at 8Ω load at 1KHz
•
Voltage gain:
+35dB
•
Input
Impedance:
10KΩ (single-ended, unbalanced)
•
Input
Sensitivity:
230mV for rated power
•
Tubes:
300B X 2 (power triode); 6SL7 X 1 (first gain
stage); 6SN7 X 1 (second gain stage)
•
Fuses:
AC Mains - 3A / 250V (110W) (two supplied –
one is a spare)
•
Dimensions:
(W x D x H) 430mm x 380mm X 240mm
•
Weight:
22Kg net.
26 Kg shipping weight
