10
Please also note that while the D-5000 DHT filters incoming low quality SPDIF interface signals,
some source devices in the market do not meet S/PDIF standard or are otherwise of insufficient
quality and can be noisy.
The button labelled “UPSAMPLE” is used to select the desired up-sampling rate (See Figure 1).
Repeated presses of the UPSAMPLE button move the unit through the available up-sampling rates
as indicated on the front panel.
NOTE:
The user cannot control the up-sample rate for conversion to DSD; the D-5000 DHT’s
conversion to DSD and PCM “UPSAMPLE” functions are discrete processes.
Drivers are not required for Mac/Linux operating systems. The Thesycon driver is compatible for
Windows applications and is available on-line. It is currently planned to have a Windows compatible
driver that will specifically recognize the D-5000 DHT DAC available for download from the
Hammertone Audio (
www.Hammertoneaudio.com
) and Allnic Audio (
www.Allnicaudio.com
)
websites.
Of course, BE CAREFUL about differences in gain between your sources. Generally, disc players and
tuners will have greater gain than phono-stages. That means the volume setting for listening to your
turntable might be too high for listening to CDs.
When you are finished listening, turn off your power amplifier(s); then turn off your preamplifier
and then turn off your sources last, including the D-5000 DHT by pressing in the bottom of the
on/off rocker switch, located on the left side panel near the front of the unit.
NOTE:
While the D-5000 DHT DAC is run in and tested at the factory, users have reported that the
sound improves steadily through the first two to three hundred hours of use.
In the case of any failure, please contact your Allnic dealer for assistance.
THE REMOTE CONTROL
The remote control allows remote operation of all the functions on the front panel of the D-5000
DHT. It does not support the on/off function. The remote control provided is a standard Apple
product. All functions controllable by the remote are manipulated by using the large button at the
top of the remote control, which is surrounded by a black ring with a white dot at its top and
bottom and left and right sides (see Figure 4).
The DAC functions are selected as follows:
•
Pressing the upper part of the black main button ring selects the various inputs from right to
left on the face of the unit
•
Pressing the lower part of the black main button ring selects the various inputs from left to
right on the face of the unit
Содержание D-5000 DHT
Страница 1: ...ALLNIC AUDIO D 5000 DHT DIGITAL TO ANALOG CONVERTER OWNER S MANUAL...
Страница 17: ...14 Figure 1...
Страница 18: ...15 Figure 2...
Страница 19: ...16 Figure 3...
