ALL7000
Quick Installation Guide / Express Setup
- 12 -
WEBUI Configuration example
Step 1:
Connect both the Administrator’s PC and the LAN port of the ALL7000 to a hub or
switch. Make sure there is a link light on the hub/switch for both connections. The
ALL7000 has an embedded web server used for management and configuration. Use
a web browser to display the configurations of the Multi-Homing (such as Internet
Explorer 4(or above) or Netscape 4.0(or above) with full java script support). The
default IP address of the ALL7000 is 192.168.1.1 with a subnet mask of
255.255.255.0. Therefore, the IP address of the Administrator PC must be in the
range between 192.168.1.2 /24– 192.168.1.254/24.
If the company’s LAN IP Address is not subnet of 192.168.1.0, (i.e. LAN IP Address
is 172.16.0.1) the Administrator must change his/her PC IP address to be within the
same range of the LAN subnet (i.e. 172.16.0.0). Reboot the PC if necessary.
By default, the ALL7000 is shipped with its DHCP Server function enabled. This
means the client computers on the LAN network including the Administrator PC can
set their TCP/IP settings to automatically obtain an IP address from the ALL7000.
The following table is a list of private IP addresses. These addresses may not be
used as an WAN IP address.
10.0.0.0 ~ 10.255.255.255
172.16.0.0 ~ 172.31.255.255
192.168.0.0 ~ 192.168.255.255
