ALL 168205 Express-Setup © 2009 ALLNET GmbH All rights reserved Page 4
T
HE FIRST THING YOU NEED TO KNOW BEFORE YOU BEGIN TO INSTALL
…
1.
Before installing, make sure your PC meets these requirements for hardware installation:
Microsoft Windows® 2000, XP, Vista (only for utility-software)
Pentium® III or better, clock rate faster than 2.0GHz recommended
At least one free Ethernet port for 200Mbps PLC-Ethernet Bridge
2. Your PC must not be configured for another network. This means that:
No network clients
except for Microsoft Network*, Client for Netware* Networks, or Microsoft Family
Logon* are installed
No network services
except file and printer sharing for Microsoft Networks or Personal Web Server*
are installed
No network protocols
except Microsoft’s TCP/IP, IPX/SPX, NetBEUI, or Net BIOS support for IPX/SPX
are installed
3. Network installation requires two steps:
1.
Install the 200Mbps PLC-Ethernet Bridge
2.
For each PC to be added to the network, repeat the process
4. Check that you have the following parts for each PC on the network:
Product installation guide for
200Mbps
PLC-Ethernet Bridge
:
1.
200Mbps PLC-Ethernet Bridge
2.
Ethernet Cable (CAT 5)
