Allnet ALL0558N Скачать руководство пользователя страница 11

Страница: 11 / 88

ALL0558N

User’s Manual

2 Installation

This chapter describes how to install the ALL0558N.

Only experienced installation professionals who are familiar with local building and

safety codes and, wherever applicable, are licensed by the appropriate government regulatory
authorities should install the ALL0558N.

2.1 Pre-installation Guidelines

Select the optimal locations for the equipment using the following guidelines:

The ALL0558N should be mounted on a 1"- 4" pole. Its location should enable easy
access to the unit and its connectors for installation and testing.

The higher the placement of the antenna, the better the achievable link quality.

The antenna should be installed to provide a direct or near line of sight link with the base
station antenna. The antenna should be aligned to face the general direction of the base
station.

2.2 Installing the ALL0558N

To install the ALL0558N, use the following procedure to mount the device on a pole and refer
to the figure below.

The bottom of the ALL0558N is a removable cover. Grab the cover and push down

slightly while pulling it backward to remove the cover.

Insert a standard Ethernet cable into the RJ-45 port labeled

MAIN LAN

Slide the cover back to seal the bottom of the ALL0558N.

Remove the power cord and PoE injector from the box and plug the power cord

into the DC port of the PoE injector.

Only use the power adapter supplied with the ALL0558N. Using a different

power adapter might damage the ALL0558N!!

Plug the other side of the Ethernet cable in Step 3 into the PoE port of the PoE

injector. When you finish Step 5, the installation will resemble the following picture.

Содержание ALL0558N

























































































Результаты поиска

Содержание ALL0558N

Отзывы:

Бренды по названию

Популярные бренды

Allnet ALL0558N, Руководство пользователя

Результаты поиска

Содержание ALL0558N

Отзывы:

Бренды по названию

Популярные бренды