Macintosh Setup
1. Open the TCP/IP Control Panel.
2. Select
Ethernet
from the
Connect via
pop-up menu.
3. Select
Using DHCP Server
from the
Configure
pop-up
menu. The DHCP Client ID field can be left blank.
4. Close the TCP/IP panel, saving your settings.
If using manually assigned IP addresses instead of DHCP, the
required changes are:
•
Set the
Router Address
to the Wireless ADSL Router's IP
Address.
•
Ensure your DNS settings are correct.
Linux Setup using X Windows
Follow this procedure to set your system to act as a DHCP
client and obtain an IP Address from the Wireless ADSL
Router:
1. Start your X Windows client.
2. Select
Control Panel - Network
3. Select the "Interface" entry for your Network card. Nor-
mally, this will be called "eth0".
4. Click the
Edit
button, set the "protocol" to "DHCP", and
save this data.
5. To apply your changes
•
Use the "Deactivate" and "Activate" buttons
•
OR, restart your system.
Page
5
