Long Range Wireless Access Point / Client Bridge
Version 1.0
ALLNET GmbH –
www.allnet.de
11
3 Switching Between Operating Modes
This device can operate in three modes: Access Point, Client Bridge, and
Client Router. This chapter will describe how to switch between operating
modes.
3.1 Logging
In
To configure the device through the web-browser, enter the IP address of
the device (default:
192.168.1.1
) into the address bar of the web-browser
and press
Enter
.
Make sure that the device and your computers are configured on the
same subnet. Refer to
Chapter 2
in order to configure the IP address of
your computer.
After connecting to the IP address, the web-browser will display the login
page.
Specify
admin
for both the user name and password.
After logging in, you will see the graphical user interface of the device.
Click on the
System Properties
link under the
System
navigation drop-
down menu.
Select and operating mode from the list (Access Point, Client Bridge, or
Client Router) and then click on the
Apply
button.
