Wireless N Extender
Version 1.0
9
Use the Device as a Wireless
Repeater
Once the wireless connection from the ALL0236R to the main AP/router is established you can
connect your wireless devices like laptops and smartphones through the wireless repeater. These
devices will obtain an IP address from the main AP/router and should be able to access the
Internet from farther locations previously unreachable by your wireless signal.
Setup Diagram
Use the Device as a Wireless Bridge
Connect wired devices to your wireless network by connecting an Ethernet cable from a wired
device, such as a Desktop PC, Game Console or Internet-ready LCD TV, to the Ethernet port of
the ALL0236R.
Setup Diagram
Setup Your Device as a Wireless AP
Use the ALL0236R as a Wireless Access Point to turn a regular modem-router into a wireless
capable networking device. Simply connect an Ethernet cable from any available Ethernet LAN
port on the modem-router to the Ethernet port of the ALL0236R. The ALL0236R will serve as a
wireless interface for your wireless-enabled devices such as laptops and smartphones to connect
to the Internet via your existing modem-router.
To setup the device as a wireless AP
:
1. Connect an Ethernet cable from an available port in your modem-router and connect the
other end of the Ethernet cable to the Ethernet port of the ALL0236R.For a new Out-of-The-
Box unit, No extra configuration is needed for the ALL0236R to be used as a wireless AP.
Simply connect an Ethernet cable from your existing modem-router to the ALL0236R and
you are ready to surf the Internet wirelessly. If you have already made any configuration on
the ALL0236R, press the Reset button beside the Ethernet port for 5 seconds to restore the
device to its factory default configuration.
2. You may refer to the sticker pasted at the back of the ALL0236R for the default SSID and
password to connect your wireless devices.
NOTE: To change any wireless settings on the ALL0236R, you would need to set a static IP
address on your wireless network card to be able to access the web GUI before you can
configure the settings. Please refer to the steps on how to set a static IP on your PC also included
in this manual.