ALL-SG8308PM - User Manual
ALLNET GmbH Computersysteme 2015 – All rights reserved
12
MAC Address: Displays the unique hardware address assigned by
manufacturer (default).
S/W Version: Displays the switch’s firmware version.
H/W Version: Displays the switch’s Hardware version.
DHCP Enabled: Click the box to enable DHCP
Fallback IP address: Manually assign the IP address that the network is
using. The default IP is 192.168.2.1
Fallback Subnet Mask: Assign the subnet mask to the IP address
Fallback Gateway: Assign the network gateway for industrial switch.
The default gateway is 0.0.0.0.
Management VLAN: ID of a configured VLAN (1-4096) through which
you can manage the switch. By default, all ports on the switch are
members of VLAN 1. However, if the management VLAN is changed,
the management station must be attached to a port belonging to this
VLAN.
Name: Type in the new user name (The default value is ‘admin’).
Password: Type in the new password (The default value is ‘admin’).
SNMP Enabled: Enables or disables SNMP on the switch. Supports SNMP
version 1and 2c management clients.
SNMP Trap Destination: IP address of the trap manager to receive
notification messages from this switch. Traps indicating status changes
are issued by the switch to specified trap managers. You must specify
trap managers so that key events are reported by this switch to your
management station.
SNMP Read Community: A community string that acts like a password
and permits access to the SNMP database on this switch. Authorized
management stations are only able to retrieve MIB objects.
SNMP Trap Community: Community string sent with the notification
operation.
Ports
Port Security ensures access to a switch port based on MAC address, limits
the total number of devices from using a switch port, and protects against
MAC flooding attacks.
Port Configuration
In Port Configuration, you can set and view the operation mode for each
port.
