© ALLNET GmbH Computersysteme 2016 – All rights reserved
Errors and changes reserved
2
This quick start guide describes how to install and use the 10/100Base-TX Ethernet Extender over Twisted pair
with High Power over Ethernet (PoE+) & Power over Wire (PoW). The EoW converter introduced here consists
of a transmitter (TX) and receiver (RX) and provides one channel for Ethernet over a Twisted pair cable with
PoW & PoE.
Overview
The ALL-MC301P2WIRE Series product provides Ethernet Extension of 1-CH 10/100Base-TX over Twisted pair
cable (400m max.). The products provide high power PoE (30W max Power Sourcing Equipment (PSE)) to the
network device. The products support PoW, hence, no power connection is required for the transmitter and
the network device at the transmitter side.
General
Check the product upon receipt for any visible damage which may have been caused during shipment.
Package Content
1x ALL-MC301P2WIRE Converter
1x 2 Pin Terminal Block (WJ15EDGK)
1x 2 Pin Terminal Block (WJ2EDG)
Quick Start Guide
Hardware Description
Transmitter
Receiver
