07
06
1. Place one foot on the deck, push forward with the
other.
3. Press down on the rear brake to slow down.
5. How to ride
WARNING
6. Charging your scooter
IMPORTANT NOTES ABOUT CHARGING
7. Specifications
Net Weight
Size
Max Load
Top speed
Range
Operating temperature
Waterproof Rating
Charging time
8.6 Ibs ( 3.9 kg )
26.1 x 16 x 33.5 in ( 663 x 406 x 851mm )
110.2 Ibs ( 50 kg )
5.0 mph ( 8 km/h )
2.5-5.0 mile ( 4–8 km )
-68–140
℉
(
-20–60
℃ )
IPX4
3h
Lithium Battery
11.1V
12.6V
2.2Ah
32–113°F
(
0–45
℃ )
100W
Battery
Rated Voltage
Max Charging Voltage
Initial Capacity
Charging Temperature
Rated Power
Parameters
Battery
Motor
12.6V
1A
12.6W
Voltage
Output current
Rated power
Charger
Front wheel : 4.0 inch
Rear wheel : 3.5 inch
Rear physical brake
Wheel Size
Braking System
Others
When the scooter accelerates above1.86 mph (3 km/h),
the scooter's powertrain will activate and the scooter
moves forward automatically, then place the other foot
on the scooter.
2.
NOTE
Only the indicator light on the
charger will tell you the charging
status of the battery.
There is risk of falling down during riding, so make
sure to wear helmet and protection kits all the time.
Note, for your safety,
the motor will not engage
until the Scooter reaches
1.86 mph (3 km/h).
Step 1: Ensure that the charging port is clean and dry.
Step 2: Plug the charger into the power socket, then connect the cable with the power supply (100V ~ 240V; 50,60Hz), make
sure the light on the charger is GREEN.
Step 3: Male DC connector plug into the charging port ofthe scooter. The indicator light on the charger should change to
RED, indicating that your scooter is now, being charged. When the RED indicator light on your charger turns GREEN
then your scooter is fully charged. A full charge typically occurs within 4 hours.
Step 4: Please unplug the charger from your scooter and power outlet.
If the green light on your charger does not turn RED when you plug it into your scooter, it could mean you have to check
the cables to ensure you have a proper connection; or that your scooter is already fully chaged. Turn on the display to
check the battery status.
Do not overcharge, as this will affect the life of the battery.
The optimum charging temperature is between 32-113°F(0-45 ° C).
Extreme cold and heat can prevent your battery from being fully charged.
Make sure to unplug your charger before standing or operating you scooter,
as this can be very dangerous.
Use only the scooter charger you received in your box.
Содержание X3 Pro
Страница 8: ......
