8
7
M-D/M-E
M-F
M-G
M-H
M-H
M-D/M-E
M-F
M-G
M-F
M-C/M-D/M-E
M-C
M-F
M-G
6-2 For Recessed Back Screens or to Access A/V Inputs
TV
TV
TV
Tighten all screws but do not over tighten.
• Position the adapter brackets as close as possible to the center of the displays.
• Screw the adapter brackets onto the displays.
Note:
Choose the appropriate screws, washers and spacers (if necessary) according to the type of screens.
or
or
or
• Lift the display carefully and pull downward two straps at
the same time , then hook the adapter brackets to the
universal plate. Fasten the adapter brackets to the universal
plate by releasing the straps.
• The other displays are hung onto the universal plates in the
same way
Use the padlocks to prevent
the displays from being stolen
(The padlocks are not included).
7. Hanging the Displays onto the Universal Plates
8. Micro-Adjustment
If the displays uptilted, rotate the adjustment screws as shown in figure.
2
1
3
Note:
Adjust the
angle of displays
by the numerical
order given.
Note:
The displays are
installed to the universal
plates from the bottom
up.
P
P