PROGRAMMING
In order for the water meter to be put into use in the intended way with an
EquaScan communication module assembled, the module parameters must be
defined.
To do this, the EquaScan software is used.
Each radio module has an inductive interface, over which the module is con-
figured. Information on the index and device can be read and recorded over at
any time, independently of the radio operation. The inductive interface serves to
quickly and accurately parameterize and read data via the computer using an
inductive head. The inductive head is connected to the computer by USB and
has an attachment to position it on the module.
READING AND PROGRAMMING THE MODULE
After the module has been read via the inductive interface, the entry form for the
module parameters becomes available. The programming parameters, which are
activated by the administrator, can be selected and overwritten with new values.
These changes are adopted in the module when the next writing process begins.
Other module values and parameters can be read from the various selection
fields.
MODULE PARAMETERS
CAUTION: Programming the actual water meter index is vital for the module to
function correctly!
The following programming parameters are possible:
• Setting the internal module clock.
CAUTION: Changing the date has a direct influence on the fixed date function!
• Setting the billing month (fixed date month).
• Setting a customer serial number.
• Setting the measuring medium of cold or warm water.
• Setting the meter index of the water meter.
• Activating / deactivating the encryption (radio).
• Changing the target value (not recommended) (pulse weight = 0.001).
• Changing the meter unit (not recommended) (m
3
).
• Setting a password.
• Setting a leakage threshold.
• Resetting / deleting alarms and registers:
- removal / tamper alarm
- monthly history
- reverse flow register
- end-of-year indexes
You can find more precise information in the user´s manual or the EquaScan
software.
Inductive head for parameterizing the
module
