manualshive.com logo in svg

Allmand MAXI-LITE AS3000, Руководство оператора

Поделиться
Скачать
Allmand MAXI-LITE AS3000 Скачать руководство пользователя страница 18

18 

4.  Ensure there is adequate slack in the      

harness to prevent binding or disconnection 
when turning. 

5.  Before trailering, check all lights for proper 

operation. 

2.  Connect the safety chains to the vehicle’s 

hitch frame and crisscross the chains under 
the trailer tongue to prevent the tongue from 
dropping to the road if the trailer separates 
from the hitch ball. Rig the chains as tight as 
possible with enough slack to permit free 
turning. 

3.  Connect the 7-pin light connector from the 

trailers harness to the vehicles harness. 

TRAILERING, TRANSPORTING AND LIFTING 

7-pin Trailer Light 

Harness Connector 

Trailer Safety 

Chains 

LIFTING THE LIGHT TOWER

 

The approximate fully loaded weight of the light 
tower and trailer is:  

Vertical tower - 1,271.4 kg (2,803lbs)  

Laydown tower - 1,173.9 kg (2,588 lbs)  

The 

MAXI-LITE AS3000 

light tower is equipped 

with top forklift pockets and a lifting eye for lift-
ing or hoisting. 

PROPER CHAIN CONNECTION 

BOTTOM VIEW OF HITCH AND 

COUPLER 

Not 

for 

Reproduction

Содержание MAXI-LITE AS3000























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды