
15
SRI-2000-UV
The user should charge when the cyan light is on (about 3 ~ 4 hours
remaining power - depending on the use of the situation), do not let the
machine forced off before charging, otherwise it will reduce battery life,If
the power is not enough to force shutdown, turn OFF the switch and then
charge it.
If the machine is forced to shut down before the power is charging, may
occur:
(1) Flash red light: Please re-plug the adapter to continue charging.
(2) Machine can not boot: As the battery protection mechanism is
enabled, to be consecutively charged about 2.5 hours before stand-alone
use, for emergency use is connected to the adapter before the boot.
It is recommended that the machine be turned off when charging.
Continuous charging about six hours later, the charging protection
at this time, please re-plug the adapter to continue charging, if the
battery is fully charged, the charge indicator (red) will automatically turn
off.
When charging, you must use the adapter provided by OPTIMUM, do not
use other adapters or methods to charge the product, so as to avoid the
damage of the circuit.
Do not connect the mini-USB while the machine is on or off, otherwise it
the adapter to charge.
If the above precautions are not followed and the charging method
causes damage, it is not within the scope of the machine warranty.
※This product is used the new lithium battery,please refer to
the following Cautions and charging:
2.
3.
4.
5.
6.
7.
8.
1. The new Lithium batteries have no memory effect, can be charged on
any time, The battery is charged before it has been exhausted,
battery life will be longer.
Содержание SRI-2000-UV
