Allied LEISTER WELDPLAST S2, Руководство по эксплуатации

Страница: 14 / 16

Disassembly: For the pre-heating nozzle (9) , unscrew clamp screw (43) and pull
pre-heating nozzle (9) off the hot air duct (44) .
Assembly: Push pre-heating nozzle (9) onto the hot air duct (44) .
Make sure that it is aligned parallel to the nozzle shoe.
Tighten
clamp screw (43) .
Three different pre-heating nozzles (9) corresponding
to the weld seam width are available. The nozzle cross
sections correspond to the DVS guidelines.
Nozzle 1
Seam width
to 15 mm
Nozzle 2
Seam width
16 to 20 mm
Nozzle 3
Seam width
21 to 40 mm
Pre-heating nozzles for extruders with external air duct
Changing the pre-heating nozzle
9
44
43
Leister Technologies AG offers the right welding shoes for all common types of seam in various sizes:
Blank V Seam Fillet
weld
Overlap
seam
Corner
seam
outside
Corner
seam
short
Corner
seam
long
Angled adapter
WELDPLAST S2 / WELDPLAST S2-TPO
with integrated air duct
WELDPLAST S2 / WELDPLAST S2-PVC
with external air duct
Welding shoe range
45°
Blank V Seam Fillet
weld
Overlap
seam
Corner
seam
outside
Corner
seam
short
Corner
seam
long
90°