Allied GUH92C страница 8 Скачать руководство пользователя

Страница: 8 / 55

507867-02P

Page 8 of 55

Issue 1933

When the furnace is installed so that supply ducts carry

air circulated by the furnace to areas outside the space

containing the furnace, the return air must be handled by

ducts which are sealed to the furnace casing and which

terminate outside the space containing the furnace. This

is especially important when the furnace is mounted on

a platform in a confined space such as a closet or small

equipment room. Even a small leak around the base of the

unit at the platform or at the return air duct connection can

cause a potentially dangerous negative pressure condition.

Air for combustion and ventilation can be brought into the

confined space either from inside the building or from

outside.

Air from Inside

If the confined space that houses the furnace adjoins a

space categorized as unconfined, air can be brought in

by providing two permanent openings between the two

spaces. Each opening must have a minimum free area of 1

square inch (645 mm²) per 1,000 Btu (.29 kW) per hour of

total input rating of all gas-fired equipment in the confined

space. Each opening must be at least 100 square inches

(64516 mm²). One opening shall be within 12 inches (305

mm) of the top of the enclosure and one opening within 12

inches (305 mm) of the bottom. See Figure 5.

Figure 5.

Equipment in Confined Space - All Air From

Inside

Air from Outside

If air from outside is brought in for combustion and

ventilation, the confined space shall be provided with two

permanent openings. One opening shall be within 12” (305

mm) of the top of the enclosure and one within 12” (305

mm) of the bottom. These openings must communicate

directly or by ducts with the outdoors or spaces (crawl or

attic) that freely communicate with the outdoors or indirectly

through vertical ducts. Each opening shall have a minimum

free area of 1 square inch per 4,000 Btu (645 mm² per .59

kW) per hour of total input rating of all equipment in the

enclosure (see Figure 6 and Figure 7). It is also permissible

to bring in air for combustion from a ventilated attic (Figure

8) or ventilated crawl space (Figure 9).

Figure 6.

Equipment in Confined Space - All Air from

Outside

(Inlet Air from Crawl Space and Outlet Air to

Ventilated Attic)

When communicating with the outdoors through horizontal

ducts, each opening shall have a minimum free area of 1

square inch (645 mm²) per 2,000 Btu (.56 kW) per total

input rating of all equipment in the enclosure. See Figure

10.

When ducts are used, they shall be of the same cross-

sectional area as the free area of the openings to which

they connect. The minimum dimension of rectangular

air ducts shall be no less than 3 inches (75 mm). In

calculating free area, the blocking effect of louvers, grilles,

or screens must be considered. If the design and free area

of protective covering is not known for calculating the size

opening required, it may be assumed that wood louvers

will have 20 to 25 percent free area and metal louvers and

grilles will have 60 to 75 percent free area. Louvers and

grilles must be fixed in the open position or interlocked

with the equipment so that they are opened automatically

during equipment operation.

Figure 7.

Equipment in Confined Space - All Air from

Outside

(All Air through Ventilated Attic)

Содержание GUH92C
























































Результаты поиска

Содержание GUH92C

Отзывы:

Похожие инструкции для GUH92C

Бренды по названию

Популярные бренды

Allied GUH92C, Руководство по установке

Результаты поиска

Содержание GUH92C

Отзывы:

Похожие инструкции для GUH92C

Бренды по названию

Популярные бренды