Allied Vision Goldeye CL Series, Техническое руководство

Страница: 181 / 254

Camera interfaces
181 Goldeye G/CL Technical Manual V4.2.0
Power supply
Depending on the model, various options are available to provide Goldeye cameras
with power.
Table 112 lists the options available for all Goldeye models. All Goldeye
models do not work in reverse polarity. Refer also to Table 127 and Table 129 on
page 199 for details of pin assignment for each connector.
Ensure correct power connection
The DC port is not intended to be connected to a DC distribution network.
Goldeye model Hirose PoE
Goldeye G models
G-008 TEC1,
G-032 TEC1,
G-033 TEC1 and TECless,
G-034 TEC1 Through the Hirose I/O port, via Pin 1,
External GND , and Pin 2, External
Power.
Through the Gigabit Ethernet port
by a
PoE (IEEE 802.3at Type 1
Class 0) supported network card,
switch, or injector.
G-008 Cool TEC1 Through the Hirose 4-pin power port,
using all four pins of the connector.
These models do not use pin 2 of the
12-pin Hirose I/O port. Through the Gigabit Ethernet port
by a
PoE (IEEE 802.3at Type 1
Class 0) supported network card,
switch, or injector.
G-032 Cool TEC2 Through the Hirose 4-pin power port,
using all four pins of the connector.
These models do not use pin 2 of the
12-pin Hirose I/O port. Through the Gigabit Ethernet port
by a
PoE+ (IEEE 802.3at Type 2
Class 4) supported network card,
switch, or injector.
Goldeye CL models
CL-008 TEC1,
CL-032 TEC1,
CL-033 TEC1 and TECless,
CL-034 TEC1 Through the Hirose I/O port, via Pin 1,
External GND , and Pin 2, External
Power.
(Not applicable to Camera Link
models.)
CL-008 Cool TEC1
CL-032 Cool TEC2 Through the Hirose 4-pin power port,
using all four pins of the connector.
These models do not use pin 2 of the
12-pin Hirose I/O port. (Not applicable to Camera Link
models.)
Table 112: Differences in power supply between various Goldeye models.