Allied Vision Technologies Alvium 1800 U-500c, Руководство пользователя, Страница: 53 / 97

Specifications
53 Alvium USB Cameras User Guide V1.1.0
Lens mounts, filters, and maximum protrusion
Figure 19 shows schematics for maximum protrusion of lenses, Table 12 on
page 53 shows values for maximum protrusion.
No need to readjust lens mounts
Alvium USB camera mounts are adjusted with high precision during manufacturing.
Construction ensures permanent accuracy without need to readjust.
Figure 19: Lens mount and maximum protrusion
S-Mount (left) | CS-Mount, C-Mount (right)
*Only color models are equipped with an IR cut filter
Filters in Alvium USB color cameras
C-Mount and CS-Mount models of Alvium USB color models are delivered with IR
cut filter. The filter is permanently installed and cannot be removed.
Monochrome and S-Mount models are delivered without filter. This extends the
sensitivity for low-light imaging. Moreover, spectral sensitivity is increased. As a side
effect, color, contrast, and sharpness can be affected by near-IR wavelengths.
NOTICE
Damage to sensor or optics by unsuitable lenses
The sensor, filter, or lens can be damaged if a lens exceeding maximum protrusion
is mounted to the camera.
• Use lenses with less than the allowed maximum protrusion, see Table 12 .
• See Mounting the lens on page 63.
• For S-Mount lenses, see Mounting and focusing S-Mount lenses on page 63.
Mount Maximum protrusion
S-Mount 11.0 mm
CS-Mount 8.6 mm
C-Mount 13.6 mm
Table 12: Maximum protrusion for Alvium USB cameras
Maximum
protrusion
Sensor
Filter
*
ĨƌŽŶƚŇĂŶŐĞ
Lens mount
Maximum
protrusion
Sensor
Electronics
ĨƌŽŶƚŇĂŶŐĞ
Lens mount