Allied Telesis x510-28GPX, Справочник по командам

Страница: 650 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 650
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
S
PANNING
T
REE
C
OMMANDS
SHOW SPANNING
-
TREE MST INTERFACE
show spanning-tree mst interface
Overview This command displays the number of instances created, and VLANs associated
with it for the specified switch port.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide .
Syntax
show spanning-tree mst interface < port >
Mode User Exec, Privileged Exec, and Interface Configuration
Example To display detailed information about each instance, and all interfaces associated
with them, for
port1.0.4
, use the command:
awplus# show spanning-tree mst interface port1.0.4
Output Figure 17-11: Example output from show spanning-tree mst interface
Parameter Description
< port >
The port to display information about. The port may be a switch port
(e.g.
port1.0.4
), a static channel group (e.g.
sa2
), or a dynamic
(LACP) channel group (e.g.
po2
).
% 1: Bridge up - Spanning Tree Enabled

% 1: CIST Root Path Cost 0 - CIST Root Port 0 - CIST Bridge Priority 32768

% 1: Forward Delay 15 - Hello Time 2 - Max Age 20 - Max-hops 20

% 1: CIST Root Id 80000008c73a2b22

% 1: CIST Reg Root Id 80000008c73a2b22

% 1: CST Bridge Id 80000008c73a2b22

% 1: portfast bpdu-filter disabled

% 1: portfast bpdu-guard disabled

% 1: portfast errdisable timeout disabled

% 1: portfast errdisable timeout interval 1 sec

%

% Instance VLAN

% 0: 1

% 1: 2-3

% 2: 4-5