C613-50170-01 Rev B
Command Reference for x510 Series
577
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
VLAN C
OMMANDS
SHOW
VLAN
show vlan
Overview
Use this command to display information about a particular VLAN by specifying its
VLAN ID. Selecting
all
will display information for all the VLANs configured.
Syntax
show vlan
{all|brief|dynamic|static|auto|static-ports|
<1-4094>
}
Mode
User Exec and Privileged Exec
Example
To display information about VLAN 2, use the command:
awplus#
show vlan 2
Output
Figure 16-3:
Example output from the
show vlan
command
Related
Commands
Parameter
Description
<1-4094>
Display information about the VLAN specified by the VLAN ID.
all
Display information about all VLANs on the device.
brief
Display information about all VLANs on the device.
dynamic
Display information about all VLANs learned dynamically.
static
Display information about all statically configured VLANs.
auto
Display information about all auto-configured VLANs.
static-ports
Display static egress/forbidden ports.
VLAN ID Name Type State Member ports
(u)-Untagged, (t)-Tagged
======= ================ ======= ======= ====================================
2 VLAN0002 STATIC ACTIVE port1.0.3(u) port1.0.4(u) port1.0.5(u)
port1.0.6(u)
...
