C613-50170-01 Rev B
Command Reference for x510 Series
2618
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
LLDP C
OMMANDS
LLDP
MED
-
TLV
-
SELECT
lldp med-tlv-select
Overview
Use this command to enable LLDP-MED Organizationally Specific TLVs for
transmission in LLDP advertisements via the specified ports. The LLDP-MED
Capabilities TLV must be enabled before any of the other LLDP-MED
Organizationally Specific TLVs are enabled.
Use the
no
variant of this command to disable the specified LLDP-MED
Organizationally Specific TLVs for transmission in LLDP advertisements via these
ports. In order to disable the LLDP-MED Capabilities TLV, you must also disable the
rest of these TLVs. Disabling all these TLVs disables LLDP-MED advertisements.
Syntax
lldp med-tlv-select {[capabilities] [network-policy] [location]
[power-management-ext] [inventory-management]}
lldp med-tlv-select all
no lldp med-tlv-select {[capabilities] [network-policy]
[location] [power-management-ext] [inventory-management]}
no lldp med-tlv-select all
Parameter
Description
capabilities
LLDP-MED Capabilities TLV. When this is enabled, the
MAC/PHY Configuration/Status TLV from IEEE 802.3
Organizationally Specific TLVs is also automatically
included in LLDP-MED advertisements, whether or not it
has been explicitly enabled by the
command.
network-policy
Network Policy TLV. This TLV is transmitted if Voice VLAN
parameters have been configured using the commands:
•
•
•
switchport voice vlan priority
location
Location Identification TLV. This TLV is transmitted if
location information has been configured using the
commands:
•
•
location civic-location identifier
•
location civic-location configuration
•
location coord-location identifier
•
location coord-location configuration
•
power-management-ext
Extended Power-via-MDI TLV. This TLV is transmitted if
the port is PoE capable, and PoE is enabled (
