C613-50170-01 Rev B
Command Reference for x510 Series
2392
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
A
LLIED
T
ELESIS
M
ANAGEMENT
F
RAMEWORK
™ (AMF) C
OMMANDS
SHOW
ATMF
NODES
show atmf nodes
Overview
This command displays nodes currently configured within the AMF network.
Note that the output also tells you whether or not node map exchange is active.
Node map exchange improves the tracking of nodes joining and leaving an AMF
network. This improves the efficiency of AMF networks. Node map exchange is
only available if every node in your AMF network is running version 5.4.6-2.1 or
later. We recommend running the latest version on all nodes in your network, so
you receive the advantages of node map exchange and other improvements.
Syntax
show atmf nodes [guest|all]
Mode
Privileged Exec
Usage
You can use this command to display one of three sets of nodes:
•
all nodes except guest nodes, by specifying
show atmf nodes
•
all nodes including guest nodes, by specifying
show atmf nodes all
•
only guest nodes, by specifying
show atmf nodes guest
Examples
To display AMF information for all nodes except guest nodes, use the command:
node1#
show atmf nodes
Parameter
Description
guest
Display only guest nodes in the AMF network.
all
Display all nodes in the AMF network, including guest nodes.
Table 54-1: Sample output from
show atmf nodes
node1#show atmf nodes guest
Node Information:
* = Local device
SC = Switch Configuration:
C = Chassis S = Stackable N = Standalone
Node Device ATMF Parent Node
Name Type Master SC Domain Depth
--------------------------------------------------------------------------------
* M1 x510-28GTX Y S none 0
N3 x230-18GP N N M1 1
N1 AR4050S N N M1 1
Node map exchange is active
Current ATMF node count 3
