Allied Telesis x330-10GTX, Руководство по установке

Страница: 28 / 98

Chapter 1: Overview
28
Table 5 describes the LEDs.
1/10Gbps SFP+
Port LED
The 1/10Gbps SFP+ port has one LED that displays link/activity
information. The LED is shown in Figure 5.
Figure 5. Link/Activity LED for the 1/10Gbps SFP+ Port
Table 5. Link/Activity LEDs on the 1/2.5/5/10Gbps Copper Port
State Description
Solid Green The port has established a 2.5Gbps,
5Gbps, or 10Gbps link to a network
device.
Flashing Green The port is transmitting or receiving data
at 2.5Gbps, 5Gbps, or 10Gbps.
Solid Amber The port has established a 1Gbps link to a
network device.
Flashing Amber The port is transmitting or receiving data
at 1Gbps.
Off Possible causes of this state are listed
here:
- The port has not established a link with
another network device.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.