Configure Load Balancer Redundancy on Allied Telesis Routers and Switches
3
Example of Basic Redundancy
Configure Load Balancer 1
Name this router LB-1.
set system name=LB-1
Create the three VLANs that this example uses:
•
VLAN 2 for the public Internet side
create vlan=vlan2 vid=2
•
VLAN 3 for the private LAN side
create vlan=vlan3 vid=3
•
VLAN 4 for managing the load balancer redundancy
create vlan=vlan4 vid=4
Add ports to the three VLANs.
add vlan=2 port=1
add vlan=3 port=2-4
add vlan=4 port=5
Enable IP.
enable ip
Give the public VLAN a unique public address. Note that public clients will not browse to
this address; they will browse to the virtual balancer’s IP address instead (see step 8).
add ip int=vlan2 ip=172.214.1.3 mask=255.255.255.0
Give the private VLAN a private address. Note that the servers will not use this address as a
gateway; they will use the VRRP virtual address instead (see step 7).
add ip int=vlan3 ip=192.168.1.200
Give the redundancy management VLAN a private address.
add ip int=vlan4 ip=192.168.2.2
1.
Name the router
2.
Create the VLANs
3.
Add ports to the VLANs
4.
Configure IP on the VLANs
