manualshive.com logo in svg

Allied Telesis IS230-10GP, Руководство пользователя для веб

Поделиться
Скачать
Allied Telesis IS230-10GP Скачать руководство пользователя страница 79

Chapter 2: Managing Switch

80

Security

The Security function allows for the configuration of Storm Control, Port 
Security, Protected Ports, DoS Prevention, Applications, 802.1x, and IP 
Security. 
This section includes the following topics:

“Storm Control” 

“Port Security” on page 82

“Protected Ports” on page 82

“DoS Prevention” on page 83

“Applications” on page 85

“802.1x” on page 88

“IP Security” on page 90

Storm Control

The Storm Control page allows you to setup the units and Preamble/IFG 
to manage the occurrence of packet flooding on the LAN and consequent 
traffic to prevent the degrading of network performance.

Global Settings

To access this page, click 

Security

 > 

Storm Control

 > 

Global Settings

.

Figure 60. Security > Storm Control > Global Settings

The following table describes the items in Figure 60.

Table 57. Storm Control Global Settings

Item

Description

Unit

Select 

pps

 or 

bps

 control units for the Storm Control function.

Preamble & IFG

Select

 Excluded

 or

 Included 

to setup the Storm Control Global set-

tings.
n

Excluded: exclude preamble & IFG (20 bytes) when count 
ingress storm control rate.

n

Included: include preamble & IFG (20 bytes) when count ingress 
storm control rate.

Apply

Click 

Apply

 to save the values and update the screen.

Содержание IS230-10GP









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды