Allied Telesis IS230-10GP Скачать руководство пользователя страница 116

Страница: 116 / 136

IS230-10GP Industrial layer 2 Switch Web User Guide

117

The

Entry Information

settings in the ensuing table are informational

only:

Entry

(click the drop-down menu to select an entry), Entry ID, Circuit

ID Format, Circuit ID Content, Remote ID Format, Remote ID Content,
Low IP Address, High IP Address, Subnet Mask, Gateway, DNS,

Edit

(click to modify the settings) and

Clear

(click to clear the settings).

Lease Entry

To access this page, click

Management

DHCP Server

Lease Entry

The

Lease entry Table

settings in the ensuing table are informational

only: IP Address, Client Mac, Start Time, End Time and Type.

SMTP Client

Simple Mail Transfer Protocol (SMTP) is a protocol to send e-mail
messages between servers. SMTP is used to send messages from a mail
client to a mail server. SMTP by default uses TCP port 25.

Global Settings

The Global Settings page allows you to set the active profile for the SMTP
client.
To access this page, click

Management

SMTP Client

> Global Settings.

Figure 102. Management > SMTP Client > Global Settings

The following table describes the items in Figure 102.

The

SMTP Information

settings in the ensuing table are informational

only: Active Profile Id.

Subnet Mask

Type in the value designating the subnet mask for the IP address
pool.

Gateway

Type in the value designating the gateway for the IP address pool.

DNS

Type in the value designating the DNS for the IP address pool.

Apply

Click

Apply

to save the values and update the screen.

Table 97. Option 82 Settings (Continued)

Item

Description

Table 98. SMTP Client Global Settings

Item

Description

Active Profile

Click the drop-down menu to select the profile status (None, 1 or 2).

Apply

Click

Apply

to save the values and update the screen.

Содержание IS230-10GP









































































































































Результаты поиска

Содержание IS230-10GP

Отзывы:

Бренды по названию

Популярные бренды

Allied Telesis IS230-10GP, Руководство пользователя для веб

Результаты поиска

Содержание IS230-10GP

Отзывы:

Бренды по названию

Популярные бренды