
IS230-10GP Industrial layer 2 Switch Web User Guide
75
Pair Settings
Figure 54. L2 Switching > X-Ring Pro > X-Ring Pro Groups > Pair Setting
The following table describes the items in Figure 54.
Loopback
Detection
The Loopback Detection function is used to detect looped links. By
sending detection frames and then checking to see if the frames returned
to any port on the device, the function is used to detect loops.
Global Settings
The Global Settings page allows you to configure the state (enabled or
disabled) of the function, select the interval at which frames are
transmitted and the delay before recovery.
To access this page, click
L2 Switching
>
Loopback Detection
>
Global
Settings
.
Figure 55. L2 Switching > Loopback Detection > Global Settings
Table 51. Pair Setting
Item
Description
Pair Ring ID
Enter a number to specifies a ranging from 1 to 255 to identify a given
X-Ring group.
Port
Enter the port to assign to define the couple setting.
Master Ring ID
Click the drop-down menu to designate the master ring.
Add
Click
Add
to save the values and update the screen.
Содержание IS230-10GP
