![Allied Telesis DNC10 Series Скачать руководство пользователя страница 71](http://html1.mh-extra.com/html/allied-telesis/dnc10-series/dnc10-series_installation-and-user-manual_2902679071.webp)
DNC10 Series Network Interface Cards Installation and User’s Guide
71
Large Send Offload v1 (IPv4)
Normally, the TCP segmentation is done by the protocol stack. When you
enable the Large Send Offload property, the TCP segmentation can be
done by the network adapter. The default setting for this property is
Enabled.
To enable or disable the Large Send Offload v1 (IPv4) feature, do the
following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 58.
2. Select
Large Send Offload v1 (IPv4)
in the Property box.
The Large Send Offload v1 (IPv4) page is displayed as shown in
Figure 31.
Figure 31. Large Send Offload v1 (IPv4) Page
3. Select one of the following options:
Disabled —
The Large Send Offload v1 (IPv4) feature
is disabled
Enabled —
The Large Send Offload v1 (IPv4) feature
is enabled. This is the default setting.
4. Click
OK
.
Содержание DNC10 Series
