![Allied Telesis DNC10 Series Скачать руководство пользователя страница 66](http://html1.mh-extra.com/html/allied-telesis/dnc10-series/dnc10-series_installation-and-user-manual_2902679066.webp)
Chapter 4: Modifying Advanced Properties
66
Interrupt Moderation Rate
To improve system performance, you can configure the interrupt
moderation rate. This setting defines the maximum number of interrupts
per second that the adapter is allowed to generate. Note that decreasing
this value decreases the CPU usage.
To specify or change the Interrupt Moderation Rate feature, do the
following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 58.
2. Select
Interrupt Moderation Rate
in the Property box.
The Interrupt Moderation Rate page is displayed as shown in
Figure 28.
Figure 28. Interrupt Moderation Rate Page
3. Select one of the following options:
Adaptive —
Interrupt throttle rate (ITR) = -1, no
interrupts/sec, it is dynamically changed by the driver.
This is the default setting.
Extreme —
ITR = 3600.
High —
ITR = 2000.
Содержание DNC10 Series
