AT-3624TS Connectivity
18
Table 4 shows the ATI micro transceivers available for network
connections.
Table 4: ATI Micro Transceivers
Station Ports
For wiring flexibility, ATI offers 10BASE-T repeaters with both individual
port connectors and composite connectors for 25-pair cable. The
AT-3624TS has two 50-pin Telco (RJ21) connectors.
50-Pin Telco Receptacle (For Model AT-3624TS). The 50-pin Telco
receptacle on the AT-3624TS repeaters is shown in Figure 12.
50-Pin Telco-to-RJ45 Octopus Cables (For Model AT-3624TS). he
10BASE-T octopus cable breaks out the AT-3624TS hub 50-pin Telco
connector to individual RJ45 connectors for connecting directly into a
patch panel in the wiring closet. When purchasing an octopus cable, make
sure that it is wired for 10BASE-T.
50-Pin Telco-to-RJ45 Harmonica (For Model AT-3624TS). ATI offers
a harmonica adapter, model AT-ADAPT-2. The harmonica-style adapter
for the AT-3624TS, shown below, allows direct conversion from the 50-pin
Telco-to-RJ45 receptacles. Since there are many different standards for
the pin-out of the harmonica adapter, make sure that the pin-out of the
adapter you use complies with the 10BASE-T wiring specification. Refer to
Table 5 for the pin-out of the Telco connectors for the AT-3624TS repeater
when ordering 10BASE-T harmonica adapters from your wiring vendor, or
order model AT-ADAPT-2 from your ATI representative. Figure 13 shows
the harmonica-style adapter.
Model
Description
AT-MX25F
or AT-MX50F/SM
Fiber Optic (10BASE-FL), SMA Connector
AT-MX26F
or AT-MX40F/ST
Fiber Optic (10BASE-FL), ST Connector
AT-MX55F/SC
Fiber Optic (10BASE-FL), SC Connector
AT-210T
or AT-210TS or AT-MX20T
UTP (10BASE-T)
AT-MX10
or AT-MX10S
Thin Ethernet (10BASE2)
Figure 12: 50-Pin Telco
Receptacle (RJ21)
RD - TD -
RD + TD +
27
26
1
1 2 3
4 5 6 7
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
2