CentreCOM 3600 Series Hub/Repeaters
17
External Transceivers
Another option is to configure the AT-3600 AUI network port for other
media by using an external transceiver. Table 3 shows the ATI micro
transceivers available for this purpose.
Table 3:
ATI Micro Transceivers
Back Panel Features
All independently manageable AT-3600 Series hubs have the same back
panel layout and features. An AT-3606F is shown in Figure 16:
❑
Firmware Cassette slot used to install new network management
software; see
CentreCOM 3600 Series and AT-S4 Firmware Module
Network Operations Manual.
❑
Interrepeater bus connector that attaches the AT-3600 module to
the backplane bus in a concentrator chassis.
❑
Status indicators providing information on the hub as a whole; for
convenience, these LEDs appear on both the front and back panels
of each AT-3600 module.
Model
Description
AT-MX25F
or AT-MX50F/SM
Fiber Optic (10BASE-FL), SMA Connector
AT-MX26F
or AT-MX40F/ST
Fiber Optic (10BASE-FL), ST Connector
AT-MX55F/SC
Fiber Optic (10BASE-FL), SC Connector
AT-210T
or AT-210TS or AT-MX20T
UTP (10BASE-T)
AT-MX10
or AT-MX10S
Thin Ethernet (10BASE2)
Figure 16:
AT-3606F Back
Panel
3606F
CentreCOM
TM
IEEE 802.3 / ETHERNET 10BASE-FL/FOIRL
6 PORT HUB / REPEATER
with Network Management
STATUS
POWER
MASTER
FAULT
INTERREPEATER BUS
FIRMWARE CASSETTE
Firmware
cassette
port
Interrepeater
Hub status
LEDs
bus port
