Page 11 | AlliedWare Plus™ OS How To Note: Switching
Basic VLAN and IP configuration
To see VLAN interface details, enter the command:
awplus# show interface | begin vlan
The output looks like this:
Interface vlan1
Scope: both
Link is UP, administrative state is UP
Hardware is VLAN, address is 0000.cd24.0331 (bia 0000.cd24.0331)
IPv4 address 192.168.1.1/24 broadcast 192.168.1.255
VRRP Master of : VRRP is not configured on this interface.
index 6 metric 1 mtu 1500
arp ageing timeout 300
<UP,BROADCAST,RUNNING,MULTICAST>
VRF Binding: Not bound
input packets 0, bytes 0, dropped 0, multicast packets 0
output packets 2, bytes 200, multicast packets 0 broadcast packets 0
Interface vlan2
Scope: both
Link is DOWN, administrative state is UP
Hardware is VLAN, address is 0000.cd24.0331 (bia 0000.cd24.0331)
IPv4 address 192.168.2.1/24 broadcast 192.168.2.255
VRRP Master of : VRRP is not configured on this interface.
index 7 metric 1 mtu 1500
arp ageing timeout 300
<UP,BROADCAST,MULTICAST>
VRF Binding: Not bound
input packets 0, bytes 0, dropped 0, multicast packets 0
output packets 0, bytes 0, multicast packets 0 broadcast packets 0
.
.
.
