Allied Telesis AT-x220-28GS, Руководство по установке

Страница: 42 / 58

Chapter 2: Installation
32
Powering on the switch
To power on the switch, perform the following procedure:
1. Attach the power cable hook and lift to the up position ready for the AC
power plug to be inserted, as shown in Figure 21, on the back of the
switch.
Figure 21. Attaching the AC power cable hook on the switch
2. Plug the power cord into the AC power connector, as shown in
Figure 22, on the back of the switch.
Figure 22. Plugging in the AC power cord on the Switch